Manual hospital ICU bed With CPR Function
Model: SAJB-12
PRODUCT FEARURE
The bed frame is structurally robust with a load capacity of ≥240 kg, featuring electric adjustment for backrest (0-70°) and leg section (0-40°). It comes equipped with six-position foldable side rails, a buffered flip-over table, 4 infusion ports, and a retractable IV stand. The ø125 mm center-control casters are quiet and wear-resistant, with a central brake system. The entire bed is finished with an antibacterial coating, making it safe, durable, and easy to clean.
TECHNICAL PARAMETERS
- Overall Dimensions: 2220 × 960 × 500 mm (L × W × H)
- Frame: 40 × 80 × 1.5 mm steel tube, bed deck made of 1.2 mm cold-rolled steel sheet, key support components formed from 3 mm thick steel plates via one-time stamping
- Side Rails: ø19 mm stainless steel tube with built-in locking mechanism
- Casters: ø125 mm center-control covered casters with central foot-pedal brake
- Surface Treatment: Electrostatic powder coating (antibacterial paint)
Maijie Standard Double Rocking Bed MJB-8
1. Specifications: 2080*960*500mm.
2. The headboard and footboard are made of brand-new high-quality ABS engineering material, formed in one piece.
3. The bed frame is made of 40mm×80mm×1.5mm steel tubes, and the bed surface is made of 1.2mm thick cold-rolled steel plate, formed in one piece by punching and molding. The backrest, leg section, and main support connectors must all be made of 3mm thick steel plate, formed in one piece by stamping. The main shaft of the support arm is made of 3mm thick seamless steel tube, which is sturdy and durable.
4. Load capacity: The bed can support ≥240kg, backrest adjustable 0-70°±5°; leg section adjustable 0-40°±5°.
5. Both sides of the bed are equipped with six-level folding guardrails. The posts are made of φ19mm stainless steel tubes with built-in locking mechanism, providing stable structure and durability. Single-button quick positioning, anti-pinch, convenient to use.
6. Crank: ABS hand crank, hidden design, foldable, with folding angle up to 180°. The lead screw has bidirectional slip limit and in-position overload protection, equipped with ABS dust cover, fully enclosed design to prevent dust ingress.
7. Dining table: Flip-top dining table with ABS tabletop; equipped with gas pressure device for cushioning.
8. Equipped with 4 infusion ports and 2 drainage hooks. Comes with 1 stainless steel infusion pole and 1 shoe rack.
9. Casters: High-strength, wear-resistant, separate braking silent casters, all 4 casters are independently braked.
10. Mattress material: natural coir and high-density foam, total thickness 80mm, composed of 5cm thick high-density foam and 3cm thick natural coir. Outer cover is non-slip Oxford fabric with ventilation holes, elastic, waterproof, easy to clean, breathable, with zipper design.
11. Coating process requirement: “Electrophoretic coating and powder spray” (dual spraying) new technique.
Maijie Central Control Double Rocking Bed MJB-7
Specifications: 2220*960*500mm (Length*Width*Height)
1. The headboard and footboard are made of brand new high-quality ABS engineering material, formed in one piece, with anti-collision rollers on both sides, wood grain stickers, a beautiful and elegant appearance, high strength, and corrosion resistance.
2. The bed frame uses 40mm×80mm×1.5mm steel tubes, with a bed surface made of 1.2mm thick cold-rolled steel plate. The connection components for the back, foot, and main support must all be made from 3mm thick steel plates formed in one piece by stamping. The main shaft of the support arm is made of 3mm thick seamless steel pipe, sturdy and durable. Laser cutting and advanced robotic welding processes are used.
3. Load capacity: The bed can support ≥240kg, with backrest adjustment 0-70°±5° and leg adjustment 0-40°±5°.
4. Both sides of the bed are equipped with six-level folding guardrails. The posts are made of φ19mm stainless steel tubes with built-in locking mechanisms, single-key quick positioning, and hand pinch prevention.
5. Crank: Equipped with 2 sets of ABS crank handles and a crank transmission system, with bidirectional slip limit function and position overload protection function. The crank handle is made of ABS engineering plastic by one-time injection molding.
6. Dining table: Uses a flip-top table with an ABS tabletop, smooth surface, wear-resistant, and corrosion-resistant; equipped with a gas pressure device for cushioning.
7. Equipped with 4 infusion sockets and 2 drainage hooks. Comes with 1 stainless steel telescopic infusion pole (four-prong).
8. Casters: Uses φ125mm central control covered casters, with wheel axles and turntables made of precision ball bearings, easy to push, corrosion-resistant, wear-resistant, and quiet. Hair entanglement prevention is required when pushing. Braking is controlled by a central foot pedal system. The foot pedal switch is stainless steel.
9. The metal surface is coated using automated production line equipment for electrostatic powder spraying, using antibacterial paint. The product is environmentally friendly and harmless, with a bright and uniform color finish, and truly achieves internal and external rust prevention.
